If you need more informations we are pleased to answer all your mails.

Order have to be sent to motomarca@gmail.com and we confirm all prices and also the delivery cost to your address.

Jr.Pro Tyre Changer  - To be able to offer you the best European prices we have decided to have only this model in program and offer it to a extremely competitive price...

The Jr.Pro is the result of the best from the two other models and the benefit is that you can still take it with you to where you need it!

Over-sized heat treated and case hardened frame arms for maximum durability. Sliding and rotating upper arm allows for perfect indexing on any wheel! 

- Floor mounting kit
- Tire lubes (both spray lube and paste lube)
- No-Mar patented Mount/Demount bar w/extra tips

New and much better delivery cost to European countries!

*See the Rim Clamp Set for Dirtbike Tires and Heavy Cruisers.

Jr.Pro Tyre Changer  - The perfect combination of strength and flexibility.

A strong machine made to last and to work about everything you throw at it. The long bead breaker assures a smooth and easy operation and the centre rod you work from above gives full control and an easy work position/process.

The turning upper head on this tyre changer allows the machine to be mounted near a wall and saves space. Easy to mount/demount if you just use it once-in-a-while and this also means that you can take it with you anywhere you might need it... also suitable as a roadside service option for your clients!

Not only savings in cost... you also get a lot of good stuff you will be pleased to have and that will make the work even more fun and easy!

Small changes compared to the Motomarca 2 package but this gives you an even more flexible balancer with a perfect height to work it: it mounts in the base of the Jr.Pro!

Apart from that this balancer is even smaller to store or to have with you!

This one is made specially to get further in to the rims and must be used with caution; this breaker can scratch your rims if not worked carefully.

We recommend the use of rim protectors with this breaker.

These small protectors really takes care of the rims and make the work safer - using these it is very difficult to scratch the paint.

This little fellow helps mantain the tyre down in the rim and is also me to take care of the paint on them.

Nice to have when you just need a helping hand.

Save even more choosing a set of three hands!

This little buddy works as the "Extra hand" but different in design. Very robust.

PVC Coated Bead Keeper- Super rubberized coating and special design prevents the tire bead from creeping when mounting the top bead. Easily clips in place with one hand - handy as hell! Use with tire spoons or Mount/Demount bar.  Solid metal core, very durable.  Weight 2 lbs

A set of 3 clamps that will hold your rims fixed and allowing the tyre to fall down behind the rim clamp.

Delivered with extra spools.

For Dirtbikes and Heavy Cruisers
Finally! We have them! The rim clamp set for dirt bikes and heavy cruisers.
They grip rims exceptionally well with minimal compression of the tire. Clamp set allows tire sidewall to hang over clamps without interference. HIGHLY RECOMMENDED for Heavy cruisers like Goldwing and Harley Touring Models. Works well on Vintage rims too when axles stick out. Holds rims up 4 1/8 inch off of machine frame arms. Comes with extra Spool kit. Rotate spools for extended life! These clamps are installed simply by replacing your existing dog blocks, and cam block. Just slip them in place, and your ready to go.

This spoon bare gives you control and is also med to take care of your rims.

Very usefull to big cruisers and cross bikes. Even some BMW sport bikes has some rims that will benefit from the use of these spoon bars.

A full set of 4 spoon bars, normal lengt; more savings!

This bar gives you a lot of strength but is still calculated to bend before damaging your rims.

The length of this spoon bar is about 50cm!

Mounted on the vertical stand in the back of the Jr.Pro this collar will keep your spoon bars safely in place when not used... and when used you use it to keep the first spoon bar in its place while working the others!

Want to make your own tyre changer base? - no problem, we still have the needed bar to do the job so with this you have it all!

Here are some spare parts for the demount bar!

A set of 3 demount tips: 28 euro

To mount a new valve with total easyness... this one does the job!

Able to withstand a lot of heavy use this puller will install any length snap-in valve in any width rim.

* Always use lube on your valve before installing into a rim

This small multi tool does it all... mounts a new valve, cleans the threads and demounts/mounts the inner valve.

Removes/replaces the core from your valve stem. Also can be used for valve stem insertion.

This must be one of the best lubricants on the market!

Apart from the fantastic lubrication factor it also has inhibitors that protects the rims from oxidation.

Vegetable based Tire lube Paste

Just add water to this handy spray bottle with concentrated lube already inside.

This TG100 is very precise... and it remembers the last preassure taken... and it talks!

Do you have difficulties to see small numbers without your glases? - this "gizmo" is your solution!

Reliable and easy to use static balancer.

Comes with rod and small cone set.

Colour can vary from picture.

Made specially to us by No-Mar.

This balancer fits in the holes of the changer base and offers a flexible system to balance different sizes of rims.

Easy to take with you if needed and when not in use it takes very little space.

This balancer also can allow you tu use the bikes own rod to balance the wheel.

The balancing weights are in strips of 84gr and divided on blocks of 7gr.

Easy to cut exactly where you need!

Clean the rim and stick the self adhesive weight strip to it - job done!

One costs 1,70 euro... save buying 20 strips for 24 euro

One costs 3,49 euro... save buying 20 strips for 39 euro

Small cones with rod.

Works with a lot of different bikes.

Maximum diameter 25,5mm

Cones range from 1/2 through 1.02 inch. Conventional set screw lock on 1/2 x 18 inch tool steel rod (NOT INCLUDED). Cones are Polyethylene w/ brass set screws.  Free hex wrench included!

Medium cones with own rod.

Works from 17mm to 37mm

Works great with the R1 and similar bikes with big rim axel.

Cones range from 7/8 inch through 1 1/2 inch. Conventional set screw lock on 1/2 inch tool steel rod (NOT INCLUDED). Cones are Polyethylene w/brass set screws.   Good for medium weight and most new heavy weight sport bikes with rear axle hole over 1 inch diameter including ZX-6, ZX-12, ZX-14, R6, R1, Hayabusa, Newer GSXR, 03-Current Buell wheels. (Not all models listed)

Designed to work with rims from bikes that has a single arm.

Also the one you can use to car rims and other rims with big inner diamterer or rims that are very thin.

The cones can be flipped around and they can enter in each oter to fit ti thins rims.

Theses comes with a special treaded rod.

 This cone pack comes with two of our 3.5 inch cones. Easy to use. Each cone threads easily, and stays secure on our 1/2 x 18 inch tool steel ACME threaded rod ( INCLUDED ).

We have got a new transport company to take care of the delivery and this means better prices for you!

In alphabetical order:

• Denmark: 120 euro

• England: 100 euro

• France: Coming soon

• Germany: 90 euro

• Norway: Coming soon

• Sweden: Coming soon

• Your country: ? ask and we will inform you!

•